EXCHANGEABLE CONNECTING PLATE FOR AIrmaxx
AIRMAXX air hose connecting plate in 3 designs:
Plate 100 = 3 connecting points ∅ = 100 mm
Plate 50 = 6 connecting points ∅ = 50 mm
Plate 38 = 10 connecting points ∅ = 38 mm
(Please state type of connecting points when ordering)
Floor connecting piece
For all hoses with 38 or 50 mm inside diameter. High-quality, heat resisitant SBR quality. The L-shaped form allows hoses to be guided as necessary. Sits perfectly due to the slightly tapered form of the connecting piece. Drill hole diameter 50 mm.
Hose connector and PVC connecting piece
Suitable for all SUPERELASTIC FLEXTRACT hoses with left-hand thread. PVC connecting piece Ø 38 mm (for SUPERELASTIC Ø 38 mm), PVC connecting piece Ø 50 mm (for SUPERELASTIC Ø 50 mm), PVC connector Ø 38 mm (for SUPERELASTIC Ø 38 mm), PVC connector Ø 50 mm (for SUPERELASTIC Ø 50 mm), combo- PVC connecting piece (inside: Ø 50 mm smooth and thread for PVC hose Ø 38 mm).
Replacement air filter
This replacement air filter is suitable for all AB sound boxes as well as HB side channel compressors from AERIAL. Easy to change. Replace when the filter no longer fulfils its function.
Joint crossing system
AERIAL joint crossing system 38/50 mm for transporting dry air in case of, for example, water damage restoration. For use when floor tiles or natural stone slabs with joints are laid in screed. The nozzles require 6 mm drill holes where the joints cross. When this procedure is carried out correctly, the drying application can be performed with virtually no damage to the flooring.
The silver-grey EEA/PE synthetic hose is suitable for transporting warm air. The hose is smooth on the inside and corrugated on the outside. Flexible, self-supporting design. Area of application -40 to +70 °C. Diameter 50 mm.
PVC Flextract hose
The SUPERELASTIC FLEXTRACT is made of two layers of PVC with steel spring spiral and additionally equipped with an axial and radial thread reinforcement. Smooth on the inside, extremely flexible and vacuum tight, high tensile, good chemical resistance, for the most part smooth on the inside, small bend radius, UV and ozone-proof. Cadmium-free. 0 to 85 °C. Diameter 38 mm and 50 mm.
Edging joint nozzle
The edging joint nozzle can be used to carry out gentle and efficient drying along the edges of the floor. There is no need to drill any holes in the floor; the floor covering remains intact. Suitable for 38/50 mm hose systems.
AERIAL sound absorbers with 50 mm diameter and 1 1/2 thread size. Suitable for all AERIAL AB sound boxes and HB side channel compressors. The use of sound absorbers enables a noise reduction of up to 7.5 dB, depending on the type of compressor. Two sound absorbers can be connected in sequence to achieve particularly efficient noise absorption. Inconspicuously, and without reducing the performance of the fan, the blowing air stream is optimally smoothed over double the air flow distance.
The hose reduction allows ASE adsorption dryers to be connected to AB sound boxes or HB side channel compressors. This makes it possible to carry out combined drying with the above mentioned AERIAL drying units.
Outflow diameter 100 mm on dry air outlet
Connection diameter 50 mm, pipe nipple
Hose distributor T and Y
T-piece Ø 38 mm (for PVC-FLEXTRACT Ø 38 mm with thread), Y-piece Ø 38 mm (for PVC-FLEXTRACT Ø 38 mm with thread), T-piece Ø 50 mm (for PVC-FLEXTRACT Ø 50 mm with thread), Y-piece Ø 50 mm (for PVC-FLEXTRACT Ø 50 mm with thread), Y-piece Ø 50 mm (without thread for all hoses Ø 50 mm), T-piece Ø 50 mm (without thread for all hoses Ø 50 mm).
Extremely flexible, light and reinforced PVC hose made of PVC coated polyamide mesh. Vibration-proof and flame retardant. Reinforced with spring steel spiral, corrugated interior and exterior. The hose’s hard-wearing structure makes it ideal for use in practice and remarkably durable. Diameter: 80 mm and 100 mm.
Colour: grey. Area of application -30 °C to +80 °C.